All sectors

Bridges, tunnels and hydraulic structures

Inspections of civil structures

In a bridge inspection it matters whether a finding belongs to a span, a support or a joint.

Request a demo
Inspector photographing the underside of a concrete bridge

What matters in this sector

On a bridge or tunnel, the meaning of a finding depends on the component: the same crack weighs differently in a railing than at a support.

With Maintainspect you record what you see per structure and component, with a photo and a position. The next inspector opens the earlier survey and finds the same spot to compare.

Assignments you use it for

  • Periodic inspection of a bridge
  • Baseline survey of a structure
  • Re-inspection of earlier findings

What do you look for during the inspection?

  • Concrete and expansion joints
  • Railings and access
  • Drainage and tunnel installations

A question from practice

Which component does the finding belong to? Record what you see per structure and component, so the next inspection finds the same spot.

How you record it

  1. 01

    Photo of the expansion joint

    Take the photo and record what it is and what condition it is in. The finding is filed under Bridge, support 2.

  2. 02

    Record the location

    Do you have a general drawing? Tap the spot where you are standing. Without a drawing you pick or type the location, for example Bridge, support 2.

  3. 03

    Check and report

    The overview shows what is still open, for example under concrete and expansion joints. Then you share the report.

Schematic view of the tool.

Related sectors

Discuss your inspection

Tell us which locations and components you inspect. We will show how that works in the tool.

Request a demo