Bridges, tunnels and hydraulic structures
Inspections of civil structures
In a bridge inspection it matters whether a finding belongs to a span, a support or a joint.
Request a demo
What matters in this sector
On a bridge or tunnel, the meaning of a finding depends on the component: the same crack weighs differently in a railing than at a support.
With Maintainspect you record what you see per structure and component, with a photo and a position. The next inspector opens the earlier survey and finds the same spot to compare.
Assignments you use it for
- Periodic inspection of a bridge
- Baseline survey of a structure
- Re-inspection of earlier findings
What do you look for during the inspection?
- Concrete and expansion joints
- Railings and access
- Drainage and tunnel installations
A question from practice
Which component does the finding belong to? Record what you see per structure and component, so the next inspection finds the same spot.
How you record it
01
Photo of the expansion joint
Take the photo and record what it is and what condition it is in. The finding is filed under Bridge, support 2.
02
Record the location
Do you have a general drawing? Tap the spot where you are standing. Without a drawing you pick or type the location, for example Bridge, support 2.
03
Check and report
The overview shows what is still open, for example under concrete and expansion joints. Then you share the report.
Related sectors

Road construction and paving
Road survey per section or handover of asphalt and markings

Ports and terminals
Round past quays, fenders and bollards
Discuss your inspection
Tell us which locations and components you inspect. We will show how that works in the tool.
Request a demo