All sectors

Real estate and buildings

Inspections and handovers of buildings

You walk an office floor before handover and record per room what still needs attention.

Request a demo
Two people recording a door frame during an office handover

What matters in this sector

At a handover or a baseline survey of a building, the work consists of many small observations: a frame that sticks, a damaged wall, an installation that is not yet finished. Each is quickly noted; the challenge is that someone else can find them afterwards.

With Maintainspect you walk the building floor by floor and room by room. Every observation gets a photo, a description and a position on the floor plan. After the round you have one list to share with the contractor or the owner, and to reopen at the next round.

Assignments you use it for

  • Handover of an office or residential building
  • Baseline survey at purchase or start of management
  • Periodic building inspection

What do you look for during the inspection?

  • Window frames and doors
  • Wall and floor finishes
  • Sanitary fittings

A question from practice

Who takes over a punch list item? Record for each item which room it is in and which party it is for, so the contractor can find it without asking around.

How you record it

  1. 01

    Photo of the door frame

    Take the photo and record what it is and what condition it is in. The finding is filed under Floor 2, room 2.14.

  2. 02

    Record the location

    Do you have a floor plan? Tap the spot where you are standing. Without a drawing you pick or type the location, for example Floor 2, room 2.14.

  3. 03

    Check and report

    The overview shows what is still open, for example under window frames and doors. Then you share the report.

Schematic view of the tool.

Related sectors

Discuss your inspection

Tell us which locations and components you inspect. We will show how that works in the tool.

Request a demo